ROOTCASTLE / 工程实验室
滤波器设计
双二滤波器、波德图和 C 代码。
LOCAL CALCULATION · RUNS IN THE BROWSER
✓ Stable: all poles inside the unit circle
- |H(2kHz)|
- -12.37 dB
- ∠H(2kHz)
- -136.9°
- Section
- 1
- max |pole|
- 0.911594
| Section | b0 | b1 | b2 | a1 | a2 |
|---|---|---|---|---|---|
| 1 | 0.0039161235 | 0.007832247 | 0.0039161235 | -1.8153396 | 0.83100411 |
| 1 · Q14 | 64 | 128 | 64 | -29743 | 13615 |
/* Low-pass Q 0.7071, f0 1kHz, fs = 48000 Hz. Generated by Rootcastle LAB; verify against your own requirements. */
typedef struct { float b0, b1, b2, a1, a2; float z1, z2; } biquad_t;
static biquad_t stages[1] = {
{ 0.003916123487f, 0.007832246974f, 0.003916123487f, -1.815339612f, 0.8310041056f },
};
float filter_step(float x) {
for (int i = 0; i < 1; i++) {
biquad_t *s = &stages[i];
float y = s->b0 * x + s->z1;
s->z1 = s->b1 * x - s->a1 * y + s->z2;
s->z2 = s->b2 * x - s->a2 * y;
x = y;
}
return x;
}Model and assumptions
Second-order IIR (biquad) sections are designed with the bilinear transform using R. Bristow-Johnson’s “Audio EQ Cookbook” formulas. As the corner approaches fs/2, frequency warping increases the deviation from the analog prototype. 4th- and 6th-order low/high-pass filters are cascaded with Butterworth Q values (the Q input is then unused). Fixed-point results show coefficient quantization only; accumulator overflow, rounding noise and limit cycles must be tested separately.
ω0 = 2π·f0/fs; α = sin ω0 / 2Q; H(z) = (b0 + b1·z⁻¹ + b2·z⁻²) / (1 + a1·z⁻¹ + a2·z⁻²)
它的用途
双极滤波器是去除传感器信号电网干扰(50/60 Hz 陷波)、分离振动带宽或控制回路抑制噪声最常用的基础模块。在此处尝试设计,查看幅频和相频特性,然后在您自己的硬件上验证系数和 C 代码。
局限性
相位滞后会降低控制回路的稳定裕量;在将滤波器接入回路前,请重新计算相位裕量。定点实现中,在低 f0/fs 比率下,系数量化会将极点推向单位圆;必须分别测试累加器宽度和溢出行为。这不替代模拟抗混叠滤波器:混叠必须在 ADC 之前防止。
参考文献
R. Bristow-Johnson, “Cookbook formulae for audio EQ biquad filter coefficients” (W3C Audio EQ Cookbook) · A. V. Oppenheim, R. W. Schafer, Discrete-Time Signal Processing, 3rd ed., ch. 6–7 · S. Butterworth, “On the Theory of Filter Amplifiers”, 1930
教育模型。结果不足以诊断机器或确定安全运行限制。